BASIC LAYOUT REAR AXLE
BARSTOOL RACER SPORT & PRO
STEP 1
Simple assembly guide for the Sport Barstool racer and Pro racer.
|
Upon receiving your Barstool racer please note any freight damage to the shipping box's. If there is visible damage you must report the damage to the delivery company who delivered the product, failure to do so may result in denial of insurance claim for lost or damaged parts.
|
STEP 2
For sales and technical support
|
(909) 554-0054
Install axle bearing as shown ( fig 2) onto
flangettes remove set screws from the bearings.
NOTE the two silver flanges will sandwich the
bearing and then bolt the assembly to the axle
hanger
fig 2
From the rear of the frame insert the axle about
4" into the bearing. Insert (1) shaft collar on the
axle then the brake rotor slide the axle farther in
to the bearing , insert (1) axle collar and then the
sprocket hub and (1 or 2 more collars onto the
axle, slide the axle into the left bearing, center
the axle. Axle should be sticking out about 7" on
both sides. Tighten the axle bearing bolts now
to hold the axle in place, The axle collars that are
near the bearing need to be set in place as
shown in (fig 3) these lock the axle in place so
tighten hard.
click on image for larger view of axle assembly
|
fig 3
Please Note The assembly instructions are for general installation and may
very from racer to racer . Parts shown may differ as illustrated